6.5 General warnings and recommendations for cor-
rect maintenance
• Clean the filters under running water (at room temperature) using a
stiff brush.
• When removing the filter, take care that there are no food residues on
it. If any residues fall into the washing pit (ref. A fig. 6-06), they might
block hydraulic components or foul the spray arm nozzles.
• It is essential to thoroughly clean the filters according to the above
instructions: the dishwasher cannot function if the filters are clogged.
• Carefully replace the filters in their seats, to avoid damaging the wash
pump.
A
Fig. 6-06
Prolonged disuse
• Run the soak program twice in succession.
• Unplug the power cord from the socket.
• Leave the door slightly open in order to prevent the formation of un-
pleasant odors inside the washing tank.
• Fill the rinse-aid dispenser.
• Shut off the water supply tap.
38
EN
WARNINGS
To Next Page
Loading...
Need help?
General
