Only run the soak program with half loads.
To run programmes 6, 7, 8, 9, 10, select the required standard programme
and then press the quick time option button (ref. 6 fig. 2-02).
After using the above tables to choose the most suitable washing cycle,
program the appliance.
Before starting a washing program, make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser (to add detergent, see the instructions in the
general manual).
• The spray arms are able to rotate freely and without ob-
struction
• The racks have been correctly loaded (see the instruc-
tions in the general manual).
• The dishwasher door is securely closed.
INFORMATION DISPLAY
Information displayed
Scheduled program duration
Remaining program time
Delayed start : 1 – 24 hours
Error message : Err
2.2.1 Switching on
Press the on/off button (ref. 1 fig. 2-02) to start the dishwasher. Then wait
for one of the program indicator lights to turn on (ref. 2 fig. 2-02).
USER INSTRUCTIONS
9
EN
To Next Page
Loading...
Need help?
General
