If the dishes fail to dry or remain dull, check that:
• there is rinse aid inside the special container;
• the rinse aid dispenser setting is correct;
• the detergent used is of good quality and has not lost its effectiveness
(for example, through incorrect storage, with the box left open).
• Non-dry synthetic dishes.
Synthetic material has a lower heat storage capacity and is therefore
harder to dry.
If the dishes show signs of streaking, staining, etc., check that:
• the rinse aid dispenser setting is not too high.
If there are visible traces of rust inside the tank:
• the tank is made of steel, and therefore any rust marks are due to exter-
nal elements (fragment of rust from the water pipes, pots, cutlery, etc.)
Special products are commercially available to remove such marks.
• check that the amount of detergent being used is correct. Certain de-
tergents can be more corrosive than others.
• check that the cap of the salt container is securely closed, and that the
water softening setting is correct.
IF AFTER PERFORMING THE ABOVE TROUBLESHOOTING
INSTRUCTIONS THE PROBLEM PERSISTS, CALL THE NEAR-
EST TECHNICAL ASSISTANCE CENTRE.
WARNING: ANY OPERATIONS PERFORMED ON THE APPLI-
ANCE BY UNAUTHORIZED PERSONS ARE NOT COVERED
BY THE WARRANTY AND SHALL BE PAID FOR BY THE USER.
40
EN
WARNINGS
To Next Page
Loading...
Need help?
General
