EasyManua.ls Logo

Smeg WHT1114LSIN - User Manual

Smeg WHT1114LSIN
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2820524649_EN/ 24-11-15.(19:32)
WHT1114LSIN
Washing Machine
User’s Manual
Lavatrice
Manuale utente
Document Number

Questions and Answers

  • G
    Gregory WilsonSep 23, 2025
    Why does my Smeg WHT1114LSIN Washer it does not rinse well?
    • W
      wsmithSep 23, 2025
      Your Smeg Washer might not be rinsing well because the amount, brand, and storage conditions of the detergent used are inappropriate, so use a detergent appropriate for the washing machine and your laundry, and store it properly. The detergent might be put in the wrong compartment, so ensure it's in the correct one. The pump filter could be clogged, so check the filter. The drain hose might be folded, so check the drain hose.
  • M
    Maria GonzalezAug 23, 2025
    What to do if the loading door of my Smeg Washer cannot be opened?
    • D
      Daniel MurphyAug 23, 2025
      If the loading door of your Smeg Washer cannot be opened, it could be due to a few reasons. The door lock may be activated because of the water level in the machine, so drain the water by running the Pump or Spin program. The machine might be heating water or is in the spinning cycle, so wait until the program completes. The child lock might be engaged, so wait a couple of minutes for the door lock to deactivate after the program ends.
  • Y
    ymorrisAug 25, 2025
    What to do if my Smeg Washer programme does not start after closing the door?
    • K
      kristen05Aug 26, 2025
      If the program on your Smeg Washer doesn't start after closing the door, it might be because the Start / Pause / Cancel button was not pressed. Press the Start / Pause / Cancel button.
  • J
    Jeffrey EscobarAug 27, 2025
    Why is my Smeg WHT1114LSIN not switching to the spinning step?
    • W
      Walter GambleAug 27, 2025
      Your Smeg Washer might not switch to the spinning step because there might be an unbalanced load in the machine. The automatic unbalanced load detection system might be activated due to the laundry being unevenly distributed in the drum. Also, the machine will not spin if water is not drained completely, so check the filter and the draining hose. Finally, excessive foam might have occurred, activating the automatic foam absorption system due to too much detergent usage, so use the recommended amount of detergent.
  • J
    james78Aug 27, 2025
    Why does my Smeg Washer vibrate or make noise?
    • Z
      zoe53Aug 27, 2025
      Your Smeg Washer might be vibrating or making noise due to several reasons: it might be unbalanced, so adjust the feet to level the machine; a hard substance might be in the pump filter, so clean the pump filter; the transportation safety bolts might not be removed, so remove them; the laundry quantity might be too little, so add more laundry; the machine might be overloaded, so take some laundry out or distribute the load evenly; or the machine might be leaning on something, so make sure it is not.
  • K
    Kelsey HarrisSep 17, 2025
    Why does my laundry does not smell like the softener after using my Smeg WHT1114LSIN Washer?
    • N
      Nicholas GreeneSep 18, 2025
      If your laundry doesn't smell like the softener after using your Smeg Washer, it could be because the detergent is put in the wrong compartment. If detergent is put in the prewash compartment although a prewash cycle is not selected, the machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water and put the detergent in the correct compartment. Also, detergent might be mixed with the softener, so do not mix the softener with detergent and wash and clean the dispenser with hot water.
  • A
    Anna JohnsonSep 14, 2025
    Why does my Smeg WHT1114LSIN laundry became stiff after washing?
    • B
      Brian WhiteSep 14, 2025
      Laundry can become stiff after washing in your Smeg Washer if an insufficient amount of detergent is used, so use an appropriate amount according to the water hardness. Also, if detergent is put in the prewash compartment although a prewash cycle is not selected, the machine can take this detergent during rinsing or the softener step, so put the detergent in the correct compartment. Detergent might also be mixed with the softener, so do not mix them and wash and clean the dispenser.
  • G
    Greg StanleySep 15, 2025
    Why does my Smeg Washer clothes smell unpleasantly?
    • J
      Jason JonesSep 15, 2025
      If your clothes smell unpleasant after washing in your Smeg Washer, it could be because odors and bacteria layers have formed on the drum as a result of continuous washing at lower temperatures and/or in short programs. Leave the detergent drawer as well as the loading door of the machine ajar after each washing to prevent a humid environment favorable for bacteria.
  • M
    Michael GutierrezSep 6, 2025
    Why does my Smeg Washer machine directly discharge the water it takes in?
    • C
      Catherine LeeSep 6, 2025
      Your Smeg Washer might be directly discharging the water it takes in because the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
  • P
    Paige EvansSep 3, 2025
    Why is the washing performance of my Smeg WHT1114LSIN poor, with stains persisting or laundry not whitening?
    • J
      Jennifer HumphreySep 3, 2025
      Poor washing performance with stains persisting or laundry not whitening in your Smeg Washer can be due to several factors. You might be using an insufficient amount of detergent, so use the recommended amount. The machine may be overloaded, so do not load excessively. You might have selected the wrong program and temperature, so choose the proper settings. The wrong type of detergent could be in use, so use original detergent appropriate for the machine. You may also be using too much detergent, so ensure correct usage.

Smeg WHT1114LSIN Specifications

General IconGeneral
TypeFreestanding
Capacity11 kg
Spin Speed1400 RPM
Energy Efficiency ClassA+++
ColorSilver
Loading typeFront
Noise level spinning76 dB
Number of Programs16
Water Consumption54 liters

Related product manuals