What to do if my Smeg WHT1114LSUK Washer does not drain water?
If your Smeg Washer isn't draining water, the issue might be: * The water drain hose could be clogged or twisted; try cleaning or straightening it. * The pump filter may be clogged; try cleaning the pump filter.
Why is my Smeg Washer not filling with water?
If your Smeg Washer isn't filling with water, here's what you can check: * Make sure the tap is turned on. * Ensure the water inlet hose isn't bent; if it is, straighten it. * Check if the water inlet filter is clogged and clean it if necessary. * Verify that the loading door is completely closed.
How to fix Smeg Washer that vibrates or makes noise?
If your Smeg Washer is vibrating excessively or making unusual noises, consider the following possible causes: 1. The machine may be unbalanced; adjust the feet to level it. 2. A hard object might be lodged in the pump filter; clean the filter. 3. The transportation safety bolts might not have been removed; remove them. 4. The laundry load might be too small; add more laundry. 5. The machine might be overloaded; remove some laundry or redistribute it evenly. 6. The machine might be leaning against something; ensure it's standing freely.
Why is there too much foam in my Smeg Washer?
If you observe excessive foam in your Smeg Washer, the reasons could be: * You might be using detergents that aren't suitable for washing machines; switch to appropriate detergents. * You might be using too much detergent; reduce the amount. * The detergent might be placed in the wrong compartment; ensure it's in the correct one.
Why is there detergent residue in the Smeg WHT1114LSUK detergent drawer?
If you're finding detergent residue in the drawer of your Smeg Washer, here are a few possible causes: * The detergent drawer might be wet when you add detergent; dry the drawer before adding detergent. * The detergent itself may have become damp; store detergents in a dry, cool place. * The water pressure might be low; check the water pressure. * There may be a problem with the detergent drawer valves; in this case, call the Authorized Service Agent.
Why doesn't my laundry smell like softener after using my Smeg Washer?
If your laundry doesn't smell like softener after washing in your Smeg Washer, it could be because: * Detergent was put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water. Put the detergent in the correct compartment. * Detergent might be mixed with the softener. Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
Why did my Smeg Washer stop shortly after starting?
If your Smeg Washer stopped shortly after the program started, it might have stopped temporarily due to low voltage. It will resume running when the voltage restores to the normal level.
Why does my Smeg WHT1114LSUK immediately discharge the water it takes?
If your Smeg Washer immediately discharges the water it takes in, the draining hose might not be at the correct height. Connect the water draining hose as described in the operation manual.
Why did laundry become stiff after washing in my Smeg Washer?
If your laundry feels stiff after washing in your Smeg Washer, it could be due to using an insufficient amount of detergent for the water hardness. Use an appropriate amount of detergent according to the water hardness.
General| Type | Freestanding |
|---|---|
| Loading type | Front Load |
| Load Capacity | 11 kg |
| Spin Speed | 1400 rpm |
| Energy Rating | A+++ |
| Color | White |
| Noise level spinning | 75 dB |
| Number of Programs | 16 |
To Next Page
