Why does my Smeg Washer stop soon after starting?
If your Smeg washer stops shortly after starting, it may have temporarily stopped due to low voltage. It will resume running when the voltage returns to normal.
Why is my Smeg Washer not draining water?
If your Smeg washer is not draining water, the drain hose may be clogged or twisted, or the pump filter may be clogged. Clean or flatten the hose and clean the pump filter to resolve this issue.
Why won’t my Smeg WHT812EIT-1 Washer go to the spinning step?
If your Smeg washer is not switching to the spinning step, there might be an unbalanced load. The automatic unbalanced load detection system might be activated due to the laundry's distribution in the drum. Also, the machine will not spin if water is not drained completely, so check the filter and the draining hose. Excessive foam from too much detergent could also be the cause; use the recommended amount.
Why does my Smeg Washer take so long to wash?
If your Smeg washer is taking longer than usual, it could be due to low water pressure, low voltage, or low input water temperature. The machine waits until it takes in enough water or reaches the selected temperature. Also, the number of rinses might have increased, or excessive foam might have occurred. Use the recommended amount of detergent.
How to improve stain removal in my Smeg Washer?
If your Smeg washer's washing performance is poor with stains persisting or laundry not whitening, ensure you're using the recommended amount of detergent, not overloading the machine, selecting the correct program and temperature, and using the right type of detergent. Also, make sure to put the detergent in the correct compartment and avoid mixing bleaching agents with detergent.
Why does my Smeg Washer immediately drain water?
If your Smeg washer is discharging water immediately, ensure the draining hose is connected at the correct height as described in the operation manual.
Why is my Smeg Washer creating too much foam?
If your Smeg washer is forming too much foam, use detergents specifically designed for washing machines in the correct amount, and store them properly. Reduce detergent for meshed laundry, put it in the correct compartment, and if the softener is being taken early, contact an authorized service agent.
How to stop foam overflowing from Smeg Washer detergent drawer?
To stop foam overflowing from the detergent drawer of your Smeg washer, mix 1 tablespoon of softener with ½ liter of water and pour it into the main wash compartment. Also, ensure you are using the correct amount of detergent suitable for the indicated programs.
Why does my Smeg Washer leave clothes gray?
If your Smeg washer's washing performance is poor and clothes are gray, it could be due to insufficient detergent over a long period, washing at low temperatures, using insufficient detergent with hard water, or using too much detergent. Use the recommended amount of detergent appropriate for water hardness and laundry, and select the proper temperature.
What to do if the Smeg Washer programme won't start?
If the programme on your Smeg washer cannot be started or selected, the washing machine may have switched to self-protection mode due to a supply problem. Press and hold the On/Off button for 3 seconds.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Product colour | White |
| Capacity | 8 kg |
| Energy Efficiency Class | A |
| Spin Speed | 1200 RPM |
| Built-in display | Yes |
| Door hinge | Left |
| Drum material | Stainless steel |
| Drum volume | 52 L |
| Spin-drying class | B |
| Washing class | A |
| Noise level (spin) | 76 dB |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Remaining time indication | Yes |
| Water consumption washing per cycle | 50 L |
| Noise Level (Spinning) | 76 dB |
| Delay Start | Yes |
| Child Lock | Yes |
| Display | Yes |
| Programs | Cotton, Quick, Synthetics |
| Loading type | Front-load |
| Control type | Rotary |
| Water Consumption | 50 L |
To Next Page
