EasyManua.ls Logo

Smeg WHT814LSIT - User Manual

Smeg WHT814LSIT
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2820524249_IT/ 10-09-14.(11:13)
WHT814LSIT
Numero del documento
Lavatrice
Manuale utente
Washing Machine
User’s Manual
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Smeg WHT814LSIT o
cerca il tuo prodotto tra le migliori offerte di Lavatrici e Asciugatrici

Questions and Answers

  • J
    Justin ThompsonSep 23, 2025
    Why does my Smeg WHT814LSIT Washer not rinse well?
    • M
      Mr. Ian WilliamsSep 23, 2025
      If your Smeg Washer isn't rinsing well, consider these possibilities: * The detergent's amount, brand, or storage is inappropriate; use a suitable detergent and store it properly. * Detergent is in the wrong compartment; put it in the correct one. * The pump filter is clogged; check the filter. * The drain hose is folded; check the drain hose.
  • M
    Mrs. Robin Peterson MDAug 23, 2025
    What to do if the loading door of my Smeg WHT814LSIT Washer cannot be opened?
    • P
      pbakerAug 23, 2025
      If the loading door of your Smeg Washer won't open, it could be due to a few reasons: * The door lock is activated because of the water level; drain the water by running the Pump or Spin programme. * The machine is heating or spinning; wait until the programme completes. * The child lock is engaged; wait a couple of minutes after the programme ends for deactivation.
  • S
    Sara FieldsAug 25, 2025
    What to do if my Smeg Washer programme cannot be started or selected?
    • S
      Steven ClarkAug 25, 2025
      If the programme on your Smeg Washer cannot be started, the machine may have switched to self-protection mode due to a supply problem such as line voltage or water pressure. Press and hold the On/Off button for 3 seconds to cancel the program.
  • L
    Leonard RobertsonAug 26, 2025
    Why does my Smeg Washer machine not switch to the spinning step?
    • A
      Amanda FitzpatrickAug 26, 2025
      Your Smeg Washer might not switch to the spinning step due to: * An unbalanced load; the automatic load detection system may be activated. * Incomplete water drainage; check the filter and draining hose. * Excessive foam; use the recommended amount of detergent.
  • A
    Anthony RhodesAug 27, 2025
    Why does my Smeg Washer machine vibrate or make noise?
    • T
      Todd AguirreAug 27, 2025
      Your Smeg Washer may vibrate or make noise due to several reasons: * The machine might be unbalanced; adjust the feet to level it. * A hard substance might be in the pump filter; clean the pump filter. * Transportation safety bolts might not be removed; remove them. * The laundry quantity might be too little; add more laundry. * The machine might be overloaded; remove some laundry or redistribute it. * The machine might be leaning on something; ensure it's not.
  • I
    Isabella AcostaSep 18, 2025
    Why does my Smeg WHT814LSIT Washer washing performance is poor and clothes smell unpleasantly?
    • W
      whitescottSep 18, 2025
      If your Smeg Washer leaves clothes smelling unpleasant, it's likely due to odours and bacteria forming on the drum from continuous washing at low temperatures or in short programmes. Leave the detergent drawer and loading door ajar after each wash to prevent a humid environment that encourages bacteria growth.
  • P
    podonnellSep 15, 2025
    Why is the colour of the clothes faded after washing in my Smeg WHT814LSIT Washer?
    • K
      kellyellisSep 15, 2025
      The color of clothes might fade after washing in your Smeg Washer due to: * Overloading the machine; do not load in excess. * Damp detergent; keep detergents closed in a humidity-free environment. * Selecting too high a temperature; select the proper temperature according to the laundry type.
  • F
    fostertimothySep 16, 2025
    Why does my laundry became stiff after washing in my Smeg Washer?
    • E
      Erin JohnstonSep 16, 2025
      If laundry becomes stiff after washing in your Smeg Washer, it may be because: * Too little detergent is used; use an appropriate amount for the water hardness. * Detergent is in the wrong compartment; put detergent in the correct compartment. * Detergent is mixed with softener; do not mix softener with detergent. Wash and clean the dispenser with hot water.
  • D
    Dr. David SnyderSep 6, 2025
    Why is the washing performance of my Smeg WHT814LSIT poor, with stains persisting or laundry not whitening?
    • L
      Luis McdowellSep 6, 2025
      Poor washing performance with stains persisting or laundry not whitening in your Smeg Washer can stem from: * Insufficient detergent; use the recommended amount. * Overloading the machine; adhere to recommended load sizes. * Incorrect programme and temperature settings; select appropriate settings. * Using the wrong type of detergent; use a detergent suitable for the machine. * Using too much detergent; put detergent in the correct compartment and avoid mixing bleach and detergent.
  • P
    Paul ChambersSep 3, 2025
    Why does my Smeg WHT814LSIT Washer programme time not countdown?
    • L
      lriosSep 3, 2025
      If the programme time on your Smeg Washer isn't counting down, it could be due to an unbalanced load in the machine. The automatic unbalanced load detection system might be activated.

Smeg WHT814LSIT Specifications

General IconGeneral
Capacity8 kg
Spin Speed1400 RPM
Energy RatingA+++
Load typeFront Load
ColourWhite
Energy efficiency classA+++
Washing performance classA
Spinning performance classB
Programs15
Free-standingYes

Related product manuals