To Next Page
S
Susan GarciaAug 20, 2025
How to start Smeg WHT814LSIT-1 program?
- Bbarbara46Aug 20, 2025
To start the program on your Smeg Washer after closing the door, press the Start / Pause / Cancel button.
How to start Smeg WHT814LSIT-1 program?
To start the program on your Smeg Washer after closing the door, press the Start / Pause / Cancel button.
What to do if my Smeg WHT814LSIT-1 Washer does not fill with water?
If your Smeg Washer isn't filling with water, check the following: * Ensure the tap is turned on. * Check if the water inlet hose is bent and flatten it. * Inspect the water inlet filter for clogs and clean it. * Make sure the loading door is completely closed.
Why my Smeg WHT814LSIT-1 doesn't drain water?
If your Smeg Washer isn't draining water, the issue might be: the water drain hose is clogged or twisted (clean or flatten the hose); or the pump filter is clogged (clean the pump filter).
How to reduce foam in Smeg Washer?
If too much foam is forming in your Smeg Washer, it could be due to using improper detergents, using too much detergent, or storing detergent improperly. Also, some meshed laundry items may create too much foam. Ensure you are using the correct type and amount of detergent, and store it properly. Put the detergent in the correct compartment. For meshed laundry, use less detergent.
Why is my Smeg WHT814LSIT-1 vibrating so much?
If your Smeg Washer is vibrating or making noise, it could be due to several reasons: * The machine may be unbalanced; adjust the feet to level it. * A hard substance may be in the pump filter; clean the filter. * The transportation safety bolts may not have been removed; remove them. * The laundry quantity may be too little; add more laundry. * The machine might be overloaded; remove some laundry. * The machine might be leaning on something; ensure it's not.
Why does my Smeg WHT814LSIT-1 take longer than expected?
The washing cycle on your Smeg Washer might be taking longer than expected due to several factors: * Low water pressure can cause the machine to wait until it has enough water, extending the wash time. * Low voltage can prolong the washing time to ensure proper cleaning. * Low input water temperature increases the time needed to heat the water. * The number of rinses or the amount of rinse water may have increased for better rinsing. * Excessive foam might have activated the automatic foam absorption system, which can extend the cycle.
Why is my Smeg WHT814LSIT-1 Washer leaking water from the bottom?
If your Smeg Washer is leaking water from the bottom, it could be due to a clogged or twisted water drain hose (clean or flatten the hose), or a clogged pump filter (clean the pump filter).
Why doesn't my Smeg WHT814LSIT-1 rinse well?
If your Smeg Washer isn't rinsing well, the issue might be related to the detergent (inappropriate type, amount, or storage), the detergent being placed in the wrong compartment, a clogged pump filter, or a folded drain hose. Use appropriate detergent, put it in the correct compartment, check the filter, and inspect the drain hose.
Why is there detergent residue in my Smeg WHT814LSIT-1 drawer?
Detergent residue in the Smeg Washer's detergent drawer can occur if the detergent drawer is wet when adding detergent, the detergent has gotten damp, the water pressure is low, the holes of the detergent compartment are blocked, or detergent might be mixed with the softener. Dry the drawer before adding detergent, store detergents properly, check water pressure, clean the holes if they are clogged and do not mix the softener with detergent.
Why is my laundry stiff after washing in my Smeg Washer?
If your laundry becomes stiff after washing in your Smeg Washer, it may be because you're using an insufficient amount of detergent, putting detergent in the wrong compartment, or mixing detergent with the softener. Use an appropriate amount of detergent, put the detergent in the correct compartment and do not mix the softener with detergent. Wash and clean the dispenser with hot water.
General
