smith+nobel IA3642 - Page 4

04
• Do not cover the Air Fryer Oven
whilst in use. If covered, there may
be a risk of re.
• This unit has no user-serviceable
parts contained within. Do not
attempt to repair, disassemble or
modify the Air Fryer Oven.
• Improper installation may result in
the risk of re, electric shock or injury
to person.
• The manufacturer is not responsible
for any eventual damage caused
by improper or faulty use.
• The use of attachments not sold or
recommended by the
manufacturer may cause re,
electric shock or injury.
• The Air Fryer Oven is not intended to
be operated by means of an
external timer or any type of
separate remote control unit.
• Do not touch hot surfaces. The
temperature of the outer body
can get very hot while the Air Fryer
Oven is in operation. Allow the unit
to cool down before inserting or
removing parts.
• Always use oven mitts when
removing the baking tray. Allow for
metal parts to cool down
completely before cleaning.
• When operating the Air Fryer Oven,
keep at least 10cm of free space on
all sides of the appliance to allow
for adequate air circulation.
• Do not operate the Air Fryer Oven
with wet hands.
• Do not place the Air Fryer Oven on
or near combustible materials such
as curtains or tablecloths.
• Always operate on a dry level
surface. Operating on sinks or
uneven surfaces must be avoided.
• Do not clean with metal scouring
pads. Pieces may break off the pad
and touch the electrical parts,
creating a risk of electric shock.
• Let the Air Fryer Oven cool down
for approximately 30 minutes
before cleaning.
• Use extreme caution when
removing the baking tray, wire rack
or disposing of hot grease or other
hot liquids.
• Oversized foods or metal utensils
must not be inserted into Air Fryer
Oven as it may create risk of re or
electrical shock.
• When using, cleaning or moving the
appliance, avoid slamming or
knocking the glass door as the glass
may break.
• If the surface of the glass door is
cracked, switch off the appliance to
avoid the possibility of electric shock.
Warning
• If the power cord is damaged, the
power cord must be replaced by
the manufacturer, its service agent
or similarly qualied persons in order
to avoid a hazard.
• This product has not been designed
for any uses other than those
specied in this booklet.
Save These Instructions
Important Safeguards (cont.)