19
8
04 Sending 5-Tone Call
Press
2.
/ k e y t o c h o o s e
No.04 menu, LCD displays "5TON
XX","XX"indicates the group in the list.
Turn selector knob to select the desired
3.
sending 5TONE group,Press PTT to
transmit selected group.
Total:100groups,00-99,Default:00.
4.
Press
5.
key to conrm and exit.
General Setting
Content and name of 5TONE will be edited by programming
software.This radio only query edited group or name.If there is
corresponding name for 5TONE,this operation will display 5TONE
corresponding name.
Press
directly to transmit the pre-stored 5-Tone signaling.
In 5Tone signaling mode,press
for 2s until LCD displays
"AN---",turn selector knob to select desired digit(caller ID).In
this mode,press
to confirm exist digit and move cursor to
next,press
to forward cursor.After editing,press key to
operate ANI call.
Press
4.
key to conrm and exit
03 Sending 2-Tone Call
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ k e y t o c h o o s e
No.03 menu, LCD displays "2TON
XX","XX"indicates the group in the list.
Turn selector knob to select the desired
3.
sending 2TONE group,Press PTT to
transmit selected group.
Total:32groups,00-31,Default:00.
4.
Press
5.
key to conrm and exit.
Content and name of 2TONE will be edited by programming
software.
Th is ra dio o nl y que ry ed ited group o r nam e. If th ere i s
corresponding name for 2TONE,this operation will display 2TONE
corresponding name.
Press and hold
1.
key for over 2s to enter general setting menu
05 Sending DTMF call
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ key to choose No.05 menu, LCD displays "DTMF
XX","XX"indicates the group in the list.
Turn selector knob to select the desired
3.
sending DTMF group,Press PTT to
transmit selected group.
Total:16groups,00-16,Default
4.
:01.
Press
5.
key to conrm and exit.
06 Signaling Combination setup
This function is to improve the level of protecting the radio against
receiving irrelative signal.
To Next Page
Loading...