1
1
Features and Precautions
Display on a large LCD with adjustable brightness, convenient for
usage in different environments.
There are Amateur operation mode and Professional operation
mode to preset.
200 programmable memorized channels, identied by editing name.
Programming different CTCSS, DCS, 2Tone, 5Tone in per channel,
rejecting extra calling from other radios.
Various scan functions including CTCSS/DCS Scan function.
Using
5Tone to send Message, Emergency alarm, Call all, ANI,
Remotely kill, Remotely Waken, etc.
Automatic
calling Identification function by DTMF--ANI or 5Tone--
ANI .
Optional scramble function to increase confidentiality (Customer
optional).
Compander function for decrease the background noise and
enhance audio clarity, it can set compander ON/OFF per channel.
Different band width per channel,
25K for wide band, 20K for
middle band ,or 12.5K for narrow band.
Customizable password on boot and programming to protect user
privacy and information safety.
Features
This transceiver is designed for a 13.8V DC power supply. Don't use
a 24V battery to power on the transceiver.
Do not place the transceiver in excessively dusty, humid or wet
areas, nor unstable surfaces.
Please keep it away from interferential devices (such as TV,
generator etc.)
Do not expose the transceiver to long
periods of direct sunlight nor place it
close to heating appliances.
If an abnormal odor or smoke is
detected coming from the transceiver,
turn OFF the power immediately.
Contact an Anytone service station or
your dealer.
Do not transmit with high output power
for extended periods; the transceiver
may overheat.
Please observe the following precautions to prevent fire, personal
injury, or transceiver damage:
Precautions
When programming the transceiver, please rstly read the factory initial
data, then change frequency,signalling and etc. Otherwise errors may
occur because of improper frequency band and etc.
Fitted software: SMP908
To Next Page
Loading...