Snap-On CT9050 - Page 89

89
ZCT9050CE Rev. C (01/25)
UKCA DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole
responsibility of the manufacturer:
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53143, U.S.A.
OBJECT OF DECLARATION:
Product: Cordless Impact Wrench
Model No:
CT9050 Series CT9050P Series
CT9050L Series CT9050XL Series
CT9050LP Series CTQ9050 Series
Serial Number: 2118XXXX-->XXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility Regulations 2016
Regulation: Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2012 (amended)
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
Safety: BS EN 62841-2-2:2014
EMC: BS EN 55014-1:2017+A11:2020
EMC: BS EN 55014-2:2015
RoHS: EN IEC 63000:2018
OBJECT OF DECLARATION:
Product: Battery Charger Series
Model No: CTC131A/CTCEU131A
Serial Number: 2224XXXXX-->XXXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
Safety: EN 60335-2-29:2004 + A2:2010
EMF: EN 62233:2008 + AC: 2008
EMC: EN 55014-1:2017+A11
EMC: EN IEC 61000-3-2:2019
EMC: EN 61000-3-3:2013+A1
EMC: EN 55014-2:2015
OBJECT OF DECLARATION:
Product: Battery Pack
Model No: CTB185/CTB8187/CTB1856
Serial Number: 2027XXXX-->XXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Electromagnetic Compatibility Regulations 2016
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
CTB185
Safety: BS EN 62133-2:2017
EMC: BS EN 55014-1:2017+A11:2020
EMC: BS EN 55014-2:2015
CTB8187
Safety: BS EN 62133-2:2017
EMC: BS EN 55014-1:2017+A11:2020
EMC: BS EN 55014-2:2015
CTB1856
Safety: BS EN 62133-2:2017
EMC: EN 55014-1:2017+A11:2020
EMC: EN 55014-2:2015
EMC: CISPR 14-1:2016+COR1:2016 Ed 6.0
EMC: CISPR 14-2:2015 Ed 2.0
The authorized representative located within the United
Kingdom (UK) is:
Matthew Law
Snap-on Tools Ltd
Telford Way Industrial Estate
Kettering, Northants
NN16 8SN
United Kingdom
Signed for and on behalf of the above named
manufacturer:
Place and date of issue:
Kenosha WI 53143, USA
04-2023
Name, function:
Charles R Frontczak
Director of Cordless Engineering - Power Tools
Signature:
www.snapon.com