Snap-On CT9050 - Page 90

90
ZCT9050CE Rev. C (01/25)
EC DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole
responsibility of the manufacturer:
Snap-on Tools Company
2801 80th Street
Kenosha, WI 53143, U.S.A.
OBJECT OF DECLARATION:
Product: Cordless Impact Wrench
Model No:
CT9050 Series CT9050P Series
CT9050L Series CT9050XL Series
CT9050LP Series CTQ9050 Series
Serial Number: 2118XXXX-->XXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Machinery Directive: 2006/42/EC
Electromagnetic Compatibility Directive: 2014/30/EU
RoHS 3 Directive: 2015/863
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
Safety: EN 62841-2-2:2014
EMC: EN 55014-1:2017+A11:2020
EMC: EN 55014-2:2015
RoHS: EN IEC 63000:2018
OBJECT OF DECLARATION:
Product: Battery Charger Series
Model No: CTC131A/CTCEU131A
Serial Number: 2224XXXXX-->XXXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Low Voltage Directive: 2014/35/EU
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
Safety: EN 60335-2-29:2004 + A2:2010
EMF: EN 62233:2008 + AC: 2008
EMC: EN 55014-1:2017+A11
EMC: EN IEC 61000-3-2:2019
EMC: EN 61000-3-3:2013+A1
EMC: EN 55014-2:2015
OBJECT OF DECLARATION:
Product: Battery Pack
Model No: CTB185/CTB8187/CTB1856
Serial Number: 2027XXXX-->XXXXXXXX
The object of the declaration described above is in
conformity with the relevant Union harmonisation
legislation:
Electromagnetic Compatibility Directive: 2014/30/EU
References to the relevant harmonised standards used or
references to the specifications in relation to which
conformity is declared:
CTB185
Safety: BS EN 62133-2:2017
EMC: BS EN 55014-1:2017+A11:2020
EMC: BS EN 55014-2:2015
CTB8187
Safety: BS EN 62133-2:2017
EMC: BS EN 55014-1:2017+A11:2020
EMC: BS EN 55014-2:2015
CTB1856
Safety: BS EN 62133-2:2017
EMC: EN 55014-1:2017+A11:2020
EMC: EN 55014-2:2015
EMC: CISPR 14-1:2016+COR1:2016 Ed 6.0
EMC: CISPR 14-2:2015 Ed 2.0
The authorized representative located within the
European Union (EU) is:
Francesco Frezza
Snap-on Equipment
Via Prov. Carpi, 33
42015 Correggio RE
Italy
Signed for and on behalf of the above named
manufacturer:
Place and date of issue:
Kenosha WI 53143, USA
04-2023
Name, function:
Charles R Frontczak
Director of Cordless Engineering - Power Tools
Signature:
www.snapon.com