• 36 •
MAINTENANCE REPORT
From MAINTENANCE, select MAINTENANCE REPORT, the
following screen will be displayed:
Press PRINTER to print a maintenance report:
Serial number.
Total amount of recovered refrigerant.
Total running time of the vacuum pump.
Filter change detail
SERVICES ARCHIVE
Refer to SERVICES chapter.
TANK CELL CHECK
From MAINTENANCE, select TANK CELL CHECK, the following
screen will be displayed:
Wait few seconds, paying attention not to touch the machine,
then the following screen will be displayed:
Attach the reference weight to the magnet on the rear of the
machines and press ENTER. The following screen will be
displayed:
Wait few seconds, then if the tank cell is correctly calibrated the
following screen will be displayed:
Press ENTER to return to MAINTENANCE MENU
R134a MAINTENANCE REPORT
FILTER CHANGE
mm/dd/yy xx lbs
mm/dd/yy xx lbs
mm/dd/yy xx lbs
PREV
PAGE
NEXT
PAGE
TANK CELL CHECK
CHECK OK
Press ENTER to continue
R134a MAINTENANCE
TANK CELL CHECK
TANK CELL CHECK
Don't touch the machine!
please wait...
R134a MAINTENANCE
TANK CELL CHECK
TANK CELL CHECK
Attach the reference weight
to the magnet on the rear of the
machines and Press ENTER
R134a MAINTENANCE
TANK CELL CHECK
TANK CELL CHECK
Don't touch the machine!
please wait...
R134a MAINTENANCE
TANK CELL CHECK
To Next Page
Loading...
