14
Key Beep Setup
This function will allow user to enable or disable audio feedback when a button is pressed.
1. From Settings menu, use UP S /DOWN T buttons to highlight KEY BEEP selection then press
ENTER button.
2. KEY BEEP screen is displayed.
3. Use UP S /DOWN T buttons to highlight ENABLE (factory default) or DISABLE selection.
4. Press ENTER button to accept selection and exit to Settings menu.
Auto Backlight Setup
This function will allow user to enable or disable backlight from turning on during torque or angle
measurement.
1. From Settings menu, use UP S /DOWN T buttons to highlight AUTO BACKLIGHT selection then
press ENTER button.
2. AUTO BACKLIGHT screen is displayed.
3. Use UP S /DOWN T buttons to highlight ENABLE (factory default) or DISABLE selection.
4. Press ENTER button to accept selection and exit to Settings menu.
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
button
KEY BEEP
ENABLE
DISABLE
SHOW INFO
SLEEP TIME
LCD CONTRAST
KEY BEEP
button
KEY BEEP
ENABLE
DISABLE
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
button
CONTRAST: 20
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
button
CONTRAST: 80
To Next Page
Loading...
Need help?
General
