110
M2 Scope/Meter M2 Scope/Meter Remote Operation
10. Select the M2 Scope/Meter from the search results list (Figure 8-23).
Figure 8-23 Typical Device selection
A “in progress” message displays during the pairing procedure, which takes several seconds.
The Paired Devices screen displays once the procedure completes (Figure 8-24).
Figure 8-24 Typical Paired Devices screen
11. Select the Home icon on the toolbar to return to the Home screen.M2 Scope/Meter
12. After the M2 Scope/Meter has been successfully paired, turn the M2 Scope/Meter Rotary
Switch to the oscilloscope position.
13. Press and hold the F1 key to open the alternate menu.
14. Press the F4 key (once) to turn off (disable) Bluetooth Discovery mode.
The F4 field on the screen switches to normal video (black on white) when the Bluetooth
Discovery mode is inactive (Figure 8-25).
To Next Page
Loading...
