118
Scope Multimeter Operations Getting Started
Secondary Coil Adapter Lead (optional)
The optional Secondary Coil Adapter lead (Figure 9-5) connects to the clip-on secondary wire
adapter, coil-in-cap adapter or coil-on-plug adapter to display secondary waveforms.
Figure 9-5 Secondary Coil Adapter lead
Secondary Ignition Clip-on Wire Adapter (optional)
The optional Secondary Ignition Clip-on Wire Adapter (Figure 9-6) connects the Secondary Coil
Adapter lead to the vehicle Secondary wire to display ignition patterns.
Figure 9-6 Secondary Ignition Clip-on Wire Adapter
Low Amp Current Probe (optional)
The optional Low Amp Current Probe (Figure 9-7) provides accurate and reliable non-intrusive
testing of ignition coils, fuel injectors, fuel pumps, relays, electric motors, and parasitic draw. The
optional Low Amp Current Probe measures current from 10 mA to 60 Amps.
Figure 9-7 Low Amp Current Probe
To Next Page
Loading...
