EasyManuals Logo

Snapper 150Z User Manual

Snapper 150Z
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Fuel and Maintenance
Always disengage all drives, shutoff the engine, and
remove the key before doing any cleaning, refueling, or
servicing.
Gasoline and its vapors are extremely flammable. Do not
smoke while operating or refueling. Do not add fuel while
engine is hot or running. Allow engine to cool for at least 3
minutes prior to adding fuel.
Do not add fuel indoors, in an enclosed trailer, garage,
or any other enclosed area that is not well ventilated.
Gasoline spills should be cleaned up promptly and before
operation begins.
Gasoline should be stored only in sealed containers
approved for fuel.
Proper maintenance is critical to the safety and
performance of your unit. Keep the unit free of grass,
leaves, and excess oil. Be sure to perform the maintenance
procedures listed in this manual, especially periodically
testing the safety system.
Retaining Walls, Drop-Offs, and Water
Retaining walls and drop-offs around steps and water are a common hazard. Give yourself a minimum of two mower
widths of clearance around these hazards and hand-trim with a walk behind mower or string trimmer. Wheels dropping
over retaining walls, edges, ditches, embankments, or into water can cause rollovers, which may result in serious
injury, death, or drowning.
Enclosed Areas
Only operate this unit outdoors and away from
unventilated areas such as inside garages or enclosed
trailers. The engine emits poisonous carbon monoxide
gas and prolonged exposure in an enclosed area can
result in serious injury or death.
Operator Safety
Not for
Reproduction

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Snapper 150Z and is the answer not in the manual?

Snapper 150Z Specifications

18.5hp

Engine Specifications IconEngine Specifications
makeBriggs & Stratton
modelProfessional Series
gross horsepower18.5
displacement500cc
Chassis IconChassis
fuel tank capacity3.00 Gallons (11, 4 L)
rear wheels tire size18 x 8.5
rear wheels inflation pressure10-12 psi (, 69-, 83 bar)
front wheels tire size11 x 4
front wheels inflation pressure18-20 psi (1, 24-1, 30 bar)

21hp

Engine Specifications IconEngine Specifications
makeBriggs & Stratton
modelProfessional Series
gross horsepower21
displacement540cc
Chassis IconChassis
fuel tank capacity3.00 Gallons (11, 4 L)
rear wheels tire size18 x 8.5
rear wheels inflation pressure10-12 psi (, 69-, 83 bar)
front wheels tire size11 x 4
front wheels inflation pressure18-20 psi (1, 24-1, 30 bar)

Related product manuals