Snapper COMMERCIAL WALK-BEHIND - DUAL TRACTION BELT KIT

14
DUAL TRACTION BELT
ITEM PART NO. DESCRIPTION
-- 6-0937 KIT, Dual Traction Belt
(Incl. 1 thru 25)
1 1-9202 BELT, Traction (Dual Band) (2)
2 1-9223 PULLEY, Output (2)
3 1-9224 HUB, Brake (2)
4 1-9225 PULLEY, Idler (2)
5 5-9800 ASSEMBLY, Wheel (Includes
1-9206 & items 17-22) (2)
-- 1-9206 ASSEMBLY, Wheel w/o pulley
6 2-3515 SPACER (8)
7 2-3787 BUSHING, 7/8” (2)
8 3-8473 PULLEY, Traction (4)
9 4-0606 SCRAPER (2)
10 7-7670* SCREW, 3/8-24 x 1-3/4” Hex
Head Cap, Grade 5 (2)
-- 9-0629 SCREW, 3/8-16 x 2-1/4” Hex
Head Cap, Grade 5 (2)
ITEM PART NO. DESCRIPTION
11 9-0118 WASHER, 3/8” Split Lock (10)
12 9-0187 WASHER, 5/16” Split Lock (2)
13 9-0196 NUT, 5/16” Hex, Gr. 5 or B (2)
14 9-0517 WASHER, 3/8” Flat (10)
15 9-0585 NUT, 5/16-18 Flange Lock (2)
16 9-0164 SCREW, 3/8-24 x 1-1/2” Hex
Head Cap, Grade 5 (8)
17 2-3788 TIRE, 13 x 6.50-6 (4 Ply)
18 7-7312 BUSHING, Flange (2)
19 7-7313 BEARING, Roller (2)
20 7-6998 FITTING, Lube, 1/4-28, Straight
21 1-9256 ASSEMBLY, RIM, w/Flange
22 1-2234 STEM, Air Valve
23 7-7000 COLLAR CLAMP w/Set
Screw (2)
24 3-8513 GUIDE, Belt (2)
25 3-2865** GUIDE, Belt (2)
*this bolt used on units with serial numbers starting with 9 **installs on idler pulley
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES
24
9
8
7
6
5
4
3
2
1
18
17
16
15
13
12
11
10
18
24
23
21
20
19
19
11
11
This kit will fit 36 & 48” PRO
Commercial Walk-Behind
(Hydro Drive) mowers built.
Prior to 1990.
22