Snapper COMMERCIAL WALK-BEHIND - SULKY ASSEMBLY (PRO 7)

18
SULKY, PRO 7
ITEM PART NO. DESCRIPTION
-- 6-1176 KIT, Sulky (Incl. 1 thru 47)
1 2-4353 ASSEMBLY, Wheel (incl. tire,
rim, 2 ball bearings, air valve &
grease fitting (2)
2 3-3516 TUBE, Seat Support
3 3-3604 BRACE, Draw Bar (2)
4 4-1308 WELDMENT, Seat Adjust
5 4-1329 WELDMENT, Channel Brace
6 5-2821 ASS’Y, Drawbar/Hitch (incl.
items 7 thru 15)
7 1-4438 HOOK (5/16-18 thread)
8 2-4352 SPRING, 3/4” O. D. x 1-1/2”
9 3-3610 HITCH
10 3-3611 DRAWBAR
11 7-6979 NUT, 3/8-16 Hex Nyloc (2)
12 9-0188 WASHER, 5/16” Flat (11)
13 9-0517 WASHER, 3/8” Flat (2)
14 9-0629 BOLT, 3/8-16 x 2-1/4” (2)
15 9-0717 NUT, 5/16-18 Hex Nyloc (6)
16 5-2822 SEAT (with 1-9295 Decal)
17 5-2823 WELDMENT, Frame
(with 7-7774 Decal)
18 1-3370 WASHER, 1” I. D. Flat
19 1-3492 WASHER, Special (8)
20 2-2960 SPACER, Seat (2)
21 2-3735 KNOB (5/16-18 thread)
22 2-4350 SPACER, Axle (2)
23 2-4351 PIN, 1/2 x 1-3/16” Clevis
24 2-4623 CHAIN, Hitch
25 3-3606 CLAMP
26 3-3607 HITCH, Bottom
ITEM PART NO. DESCRIPTION
27 3-3608 HITCH, Top
28 3-3626 LEVER, Shift Sulky
29 3-3638 SADDLE
30 7-6526 GRIP, Adj. Lever
31 7-6934 SCREW, 5/16-18 x 3/4” Hex
Head Cap, Grade 5 (6)
32 7-6938 SCREW, 5/16-18 x 2-1/4”
Hex Head Cap, Grade 5
33 7-6979 NUT, 3/8-16 Hex Nyloc (5)
34 7-7780 PIN, Lynch
35 9-0187 WASHER, 5/16” Split Lock (7)
36 9-0250 WASHER, 1/2” Flat (2)
37 9-0297 PIN, 1/8 x 1-1/2” Cotter
38 9-0364 PIN, 5/32 x 1” Cotter (2)
39 9-0563 SCREW, 3/8-16 x 1” Hex
Head Cap, Grade 5 (3)
40 9-0588 SCREW, 3/8-16 x 2” Hex
Head Cap, Grade 5 (2)
41 9-0669 SCREW, 5/16-18 x 1-3/4”
Hex Head Cap, Grade 5 (2)
42 9-0930 BOLT, 5/16-18 x 2” Hex,
Grade 5
43 9-0959 BOLT, 5/16-18 x 2-1/2”
Sq. Neck Carriage, Grade 5
44 9-0975 NUT, 1/2-13 Hex Center
Lock, Grade 5 or B (2)
45 9-1046 SCREW, 5/16-18 x 2-1/2”
Hex Head Cap, Grade 5
46 9-1170 BOLT, 1/2-13 x 1-3/4” Bolt,
Grade 5
47 2-4354 INSTRUCTIONS
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES
This kit will fit SNAPPER
PRO 7 Gear and Hydro
Walk-Behind mowers.