25
GRASS CATCHER, MOUNT
ITEM PART NO. DESCRIPTION
-- 6-3032 KIT, Catcher Mounting (Includes items 1 thru 9)
1 5-7700 ASSEMBLY, Back Plate
2 2-2522 DECAL, Warning
3 3-3198 PLATE, Backing
4 4-2750 STRIP, Side Sealing
5 9-1134 POP RIVET (3)
6 3-4156* CAP, Deflector
7 3-4157* DEFLECTOR, Exhaust
8 3-4158* SCREW, Deflector Mounting (3)
9 6-3034 BAG, Hardware (Includes the items listed below)
10 3-3433 LATCH, Left Side
11 3-3432 LATCH, Right Side
12 4-6383 STRIP, Top Seal
13 9-1495 SCREW, 1/4-20 x 3/4” Hex Head Cap (3)
14 9-1545 NUT, 1/4-20 Hex Flange Lock (3)
15 1-5464 STUD, 3/8-24 Thread
16 9-0854 NUT, 3/8-24 Hex Nyloc
17 7-6952 SCREW, #10-24 x 5/8” Pan Head (4)
18 9-1290 NUT, #10-24 Hex Nyloc (4)
19 7-6983 WAVE WASHER (spring)
This kit will fit on PRO Gear, PRO Gear Express and PRO Hydro Mid Size walk-behind mowers,
and must be installed prior to using Cloth Grass Catcher Kit #6-3033.
With deck models SP320, SP360, SPA360, SPE360, SP480, SPA520 & SPA610, install items
12, 13 and 14 as shown above. Omit this step in all other deck models.
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES
*NOTE:
These parts are required
on Kawasaki engines
only.
13
2
15
16
HOPPER
(REFERENCE)
8
7
6
17
18
19
19
11
12
19
19
10
5
3
4
BACKPLATE
(part of kit)
14
To Next Page
Loading...
