Snapper COMMERCIAL WALK-BEHIND - GRASS CATCHER MOUNT KIT (ALT 2); CLOTH GRASS CATCHER BAG (ALT)

28
GRASS CATCHER, MOUNT
ITEM PART NO. DESCRIPTION
-- 6-1110 KIT, Grass Catcher Mount
(Includes items 1-12)
1 4-0736 PLATE, Mounting
2 3-3198 BACKING PLATE
3 3-3199 SEALING STRIP
4 9-1134 “POP” RIVET, 3/16 x 5/8” (3)
5 3-3433 LATCH, Left
ITEM PART NO. DESCRIPTION
6 3-3432 LATCH, Right
7 7-6952 SCREW, #10-32 x 5/8” Pan
Head (4)
8 7-6983 WASHER, Spring (4)
9 7-6977 NUT, #10-24 Hex Nyloc (4)
10 1-5464 STUD, 3/8-24 Thread
11 9-0854 NUT, 3/8-24 Hex Nyloc
12 2-2522 DECAL, Caution
GRASS CATCHER, CLOTH
ITEM PART NO. DESCRIPTION
-- 6-1111 KIT,Cloth Grass Catcher (Incl. items 1 thru 10)
1 5-2340 GRASS BAG, Cloth
2 4-0740 WELDMENT, Top Frame
3 4-0741 WELDMENT, Front Frame
4 3-3381 HANDLE, Short
5 3-3171 HANDLE, Long
6 3-3380 BRACE, Large
7 3-3382 BRACE, Small
8 9-0825 SCREW, 1/4-20 x 1-1/4” Hex Head Cap, Grade 5 (2)
9 9-0643 SCREW, 1/4-20 x 7/8” Hex Head Cap, Grade 5 (3)
10 7-6978 NUT, 1/4-20 Hex Nyloc (7)
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES
NOTE: Assembly of the above kit
(6-1110) is required prior
to use of kit no. 6-1111.
10
9
6
4
1
10
9
5
2 8
8
9
10
10
3
7
10
1
9
7
5
6
8
8
12
3
2
4
11
10
NOTE: The two kits shown on
this page are compatible
with SNAPPER PRO 7
commercial walk-behind
mowers.