Snom D7 - Connecting a Wireless Headset; One Module Connected to Phone

10
snom D7 User Manual Setting up the Expansion Module
Connecting a wireless headset
On phones with a single USB port, the USB port on the expansion module or the free USB port on the
last module in the daisy-chain, respectively, can be used to connect wireless headsets via their USB
adapter.
One module connected to phone
• Phone with single USB port. The USB adapter of the headset is inserted into the free USB port on
the expansion module (Fig. 10 or 11, respectively).
Fig. 10 Fig. 11
• If the Snom phone has two USB ports, the USB adapter of the USB headset can be inserted into
the USB port on the expansion module or into the free USB port on the phone (Fig. 12 or 13,
respectively).
Fig. 12 Fig. 13