104
Command Barcodes for CHS 7C /7Ci in SPP Mode or CHS 7Ci in iOS Mode
These command barcodes can be scanned with a CHS 7C/7Ci in SPP mode or a CHS 7Ci in iOS mode. Many will not work
for a CHS 7C/7Ci in HID mode. If you do not know which mode your CHS is in, you can scan the command barcode for SPP
Mode to make sure the CHS is in SPP mode.
You can alternatively use the SocketScan 10 Scanner Settings utility to modify some beep, prefix and suffix settings.
For instructions, please refer to the chapter for your OS.
To enable/disable symbologies, please use SocketScan 10 Scanner Settings. Advanced users can also use the
Symbology barcodes in the Command Barcodes Sheet for CHS 7C /7Ci, available on the SocketScan 10 installation
CD and online at: http://www.socketmobile.com/support/downloads
The CHS can only be paired with one device at a time. To use the CHS with a different device, see Appendix G
for
unpairing instructions.
IMPORTANT! Print out the page to scan the barcodes. Do not scan them onscreen.
Bluetooth Connection Settings
SPP Mode
Changes the CHS to Serial Port Profile (SPP) mode.
Required for BlackBerry, optional for Windows.
HID Mode (default)
Configures the CHS to Human Interface Device (HID) mode. The CHS will be
discoverable as a Keyboard to other Bluetooth devices.
Required for Apple iOS, Mac OS, Nokia E71.
iOS Mode
Changes a CHS 7Ci to iOS mode.
Required for Apple iOS applications developed with SocketScan 10 SDK.
Acceptor (default)
Configures the CHS to accept a Bluetooth connection puts the CHS in discoverable
mode.
Initiator
Configures the CHS to initiate a connection to a computer / device with the Bluetooth
Device Address specified in the barcode.
The barcode must be formatted in Code 128 and contain the data
#FNIaabbccddeeff# such that aabbccddeeff is the Bluetooth Device Address of
the computer/device you want to connect to the CHS.
Required for Windows when using SPP mode.
You must create a custom barcode for each
computer / device that you want to connect to
the CHS.
Use barcode generating software or website
(e.g., http://barcode.tec-it.com
))
To Next Page
Loading...
