Socket CHS Series 7 - Option 2: Using the CHS in iOS Mode

58
OPTION 2: USING THE CHS IN IOS MODE
The only 1D model of the CHS compatible with Apple iOS mode (equivalent to
SPP mode) is the 7Ci. In iOS mode, the CHS can only scan barcodes into
applications developed with the SocketScan 10 SDK.
The CHS 7Ci is made for the following Apple devices:
• iPod touch (4
th
generation)
• iPod touch (3
rd
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPad (3
rd
generation)
• iPad 2
• iPad
The CHS 7Ci works in iOS mode with iOS applications developed with
SocketScan 10 SDK 10.0.8 or later.
To learn more about compatible applications available in the App Store
™
online store:
• Please visit: http://www.socketmobile.com/appstore
• Contact your enterprise solution provider, who can also help install and set up
your iOS compatible application.
To purchase the SDK, please visit: http://www.socketmobile.com/products/sdk/
• CD only: SKU# SW1244-1321
• CD with CHS 7XiRx scanner bundle: SKU# SW1245-1322
To pair and connect the CHS and Apple device:
You only need to pair the CHS with your Apple device the first time you try to
connect.
The correct Bluetooth connection procedure may vary depending on which
application you are using. Please refer to your application documentation for
more information. Internet access may be required.
The CHS needs to be configured for iOS mode. Your application may have
specific instructions for configuring the CHS. Otherwise you can use the
Command Barcode for iOS mode in Appendix E
.