Socket DURASCAN D740 - Page 28

STATUS INDICATORS (CONTINUED)
Beep Pattern Sound Meaning
Low-High Tone Power On
High-Low Tone Power Off
2 Even Tones Power Supply detected and scanner started
charging
1 Low Beep
(iOS only)
Scanner’s keyboard toggle feature is enabled
1 Beep Scanner connected to device and is ready to scan
barcodes
1 Beep Data successfully scanned
2 Beeps (same
tone)
Scanner disconnected
1 Long Beep Scanner gave up searching for a host
3 Beeps
(escalating tone)
Scanner has been recongured (the command
scanned successfully)
3 Beeps
(escalating tone
followed by long
tone)
The command barcode did NOT work! (Verify if the
command barcode used is valid for your scanner
and try again)
28