STATUS INDICATORS (CONTINUED)
Vibrate Meaning
Vibrate Data successfully scanned
Command Barcodes are available on pages 45-50 to modify the LED,
beep, and vibrate settings.
If you are using a scanner-enabled application, typically the
application provides settings for LED, beep, and vibrate settings.
Conguration Settings
Time after powering on Scanner Bluetooth mode
0-5 minutes Discoverable and connectable
5 minutes If connection is not made, scanner
powers off
2 hours If your scanner is connected but
not used it will power off in 2
hours. When scan button is pressed
the timer is reset.
29
To Next Page
Loading...
