Need help?Do you have a question about the socomec 4145 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Continuity | Yes |
| Diode Test | Yes |
| Current AC | 600 μA to 10 A |
| Current DC | 600 μA to 10 A |
Guidelines for safe operation and hazard avoidance.
Explanation of warning symbols and their meanings.
Identifies analyzer keys and BNC/banana input ports.
Details on connecting current clamps and voltage inputs.
Explains analyzer screen types and function key usage.
Detailed guide to connecting inputs and verifying correct setup.
Guide to configuring wiring, frequency, voltage, and language settings.
Customizing time, date, and LAN interface settings.
Setting and editing limits for power quality monitoring based on standards.
Saving data to memory and connecting to a PC for data transfer.
Connecting the analyzer to a PC for remote control and data viewing.
Defines dips and swells as fast voltage deviations and their trigger conditions.
Defines interruptions as significant voltage drops and their triggers.
Capturing and analyzing quick transitions in RMS voltage.
Measuring harmonics, interharmonics, THD, and K-factor.
Displays real, apparent, reactive power, and energy usage per phase.
Quantifies luminance fluctuation caused by voltage variations.
Shows voltage/current unbalance percentages and phase angles.
Visualizes phase relations and unbalance components.
Displays bar graphs for key power quality parameters against limits.
Details specs for Vrms, Vpk, VCF, Amps, and Frequency.
Details specs for Dips&Swells and Flicker.
Instructions for setting up remote control via LAN interface.
Explains the remote control interface and file list.
To Next Page
