Need help?Do you have a question about the socomec COUNTIS M43 and is the answer not in the manual?
General| Type | Energy Meter |
|---|---|
| Voltage Input | 230/400V AC |
| Input current | 5A |
| Frequency | 50/60 Hz |
| Display | LCD |
| Mounting Type | DIN Rail |
| Communication Protocols | Modbus |
| Number of phases | Three-phase |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -20 to +70 °C |
| Protection Degree | IP20 |
| Weight | 300 g |
Accuracy ratings for voltage, current, frequency, power factor, active/reactive power, and energy.
Parameters for RS485 communication, including bus type, protocol, baud rate, address, load, distance, parity, data bits, and stop bits.
Visual representation of electrical connections for 3P4W, 3P3W, and 1P2W configurations.
Instructions for changing the default password to secure the meter's settings.
How to configure the secondary current (CT2) of the current transformer.
Configuration of the secondary voltage (PT2) of the voltage transformer.
Overview of Modbus function codes and a detailed table of input register parameters with addresses and data formats.
Settings for Modbus communication, including node address, parity, stop bits, baud rate, and password protection.
Details on setting CT/PT ratios, pulse outputs, energy types, and system parameters via Modbus.
To Next Page
