Need help?Do you have a question about the socomec COUNTIS M33 and is the answer not in the manual?
General| Brand | socomec |
|---|---|
| Model | COUNTIS M33 |
| Category | Measuring Instruments |
| Language | English |
Details the COUNTIS M33's measurement capabilities for various supply types, direct connection, and communication outputs.
Lists key features like measured parameters, bi-directional measurement, pulse outputs, RS485, direct connection, and DIN rail mounting.
Identifies usage scenarios for power systems, public facilities, industrial, residential monitoring, and solar PV applications.
Details voltage, current, frequency, insulation capabilities, power consumption, display type, and maximum reading.
Lists accuracy percentages for voltage, current, frequency, power factor, active power, and reactive power.
Covers RS485 bus type, protocol (Modbus RTU), baud rate, address, load, distance, parity, data, and stop bits.
Specifies operating/storage humidity and temperature, relevant standards, accuracy class, installation category, and IP rating.
Provides physical dimensions (height, width, length) and mounting details, illustrated with diagrams.
Illustrates the correct wiring connections for 3-phase 4-wire (3P4W), 3-phase 3-wire (3P3W), and 1-phase 2-wire (1P2W) configurations.
Explains initial display sequence upon power-up and the specific function of each control button (UI/ESC, F/PF, P, E).
Details how to view voltage, current, frequency, power factor, power (active, reactive, apparent), and energy (active, reactive) values.
Guides users through setting various parameters like password, Modbus address, baud rate, parity, stop bit, pulse output, and system type.
Lists all Modbus registers with their parameters, addresses (Hex), units, valid ranges, and read/write modes.
To Next Page