- 19
(It shows 1 impulse = 10kWh/kVArh)
1
From the Set-up menu, use and
buttons to select the Pulse Rate
option.
Press to enter the selection routine.
The current setting will flash.
Note: When it’s dFt,
it means 2.5Wh/VArh
2
Use and buttons to
choose pulse rate. On completion of the entry
procedure, press to confirm the
setting and press to return to the
main set up menu.
3.3.10
Pulse Duration
The energy monitored can be active or reactive and the pulse width can be selected as
200, 100 (default) or 60ms.
To Next Page
Loading...
