socomec COUNTIS M33 - Pulse Constant

- 18
-
defined amount of energy active or reactive.
Use this section to set up the pulse output for:
Total kWh/ Total kVArh
Import kWh/Export kWh
Import KVArh/Export KVArh
1
From the Set-up menu, use
and
buttons to select the Pulse output
option.
2
Press to enter the selection
routine. The unit symbol will flash.
Use and buttons to
choose kWh or kVArh.
On completion of the entry procedure, press
to confirm the setting and press
to return to the main set up menu.
3.3.9 Pulse Constant
Use this to set the energy represented by each pulse. Rate can be set to 1 pulse per
dFt/0.01/0.1/1/10/100kWh/kVArh.