- 14
setting up section, a password must be entered. Digits are set individually, from left to right. The
procedure is as follows:
1.
The current digit to be set flashes and is set using the and
2. Press to confirm each digit setting. The SET indicator appears after the last digit has
been set.
3. After setting the last digit, press to exit the number setting routine. The SET indicator
will be removed.
3.3.3
Set Password
1
Use the and
to choose the change password option
2-1
Press the to enter the
change password routine. The new
password screen will appear with the
first digit flashing
2-2
Use and to set
the first digit and press to
confirm your selection. The next digit will
flash.
To Next Page
Loading...
