socomec COUNTIS M33 - Set Backlit Lasting Time

- 21
-
1
From the set-up menu, use
and
buttons to select the DIT option. The
screen will show the currently selected integration
time.
2
Press to enter the selection routine.
The current time interval will flash
Use and buttons to
select the time required.
Press to confirm the selection. SET
indicator will appear.
Press to exit the DIT selection routine and return to the menu.
3.3.12 Set backlit lasting time
1 The backlit lasting time is settable
Default lasting time is 60minutes
For example, if it’s set as 5, the backlit will be off
in 5minutes from the last time operation on the
meter.