- 21
(It shows pulse width of 200ms)
1
From the Set-up menu, use and
buttons to select the Pulse width
option.
2
Press to enter the selection routine.
The current setting will flash.
Use and buttons to
choose pulse width. On Completion of the entry
procedure, press to confirm the
setting and press to return to the
main set up menu.
3.3.13 Demand Integration Time
This sets the period in minutes over which the current and power readings are integrated for maximum
demand measurement. The options are: 0, 5, 8, 10, 15, 20, 30, 60 minutes
To Next Page
Loading...
