socomec COUNTIS M43 - Part 3. Operation Instructions; Display and Operation; Button Definition; Measurement

- 6
-
Part 3. Operation Instructions
3.1 Display and Operation
When the meter is powered on, the meter will initialize and do self-checking
Display as following:
1
Full screen
2
Software version
3
Self-checking finish
3.1.1 Button Definition
3.2 Measurement
3.2.1 Voltage & Current
Press button :
Selects V and A display screen.
In Set-up Mode, it is the “Left” or “Back” button
Selects Hz and PF display screen.
In Set-up Mode, it is the “Up” button
Selects power display screen.
In Set-up Mode, it is the “Down” button
Selects energy display screen.
In Set-up Mode, it is the “Enter” or "Right" button.