socomec COUNTIS M43 - 3.3.15 Set System

- 23
-
2
Press to enter the selection routine.
The current time interval will flash
The options can be:
0(always on),5,10,30,60,120minutes
Use and buttons to
select the time required. Press to
confirm the set-up,
3.3.15 Set System
Use this section to set the type of power supply being monitored.
1
From the Set-up menu, use and
buttons to select the System option.
The screen will show the currently selected power
supply.
2
Press to enter the selection routine.
The current selection will flash. Use
and buttons to select the required
system option: 1P2(W), 3P3(W) ,3P4(W). Press
to confirm the selection. SET
indicator will appear. Press to exit
the system selection routine and return to the
menu. SET will disappear and you will be returned
to the main Set-up Menu.