socomec COUNTIS M43 - Pulse Duration

- 20
-
(It shows 1 impulse = 10kWh/kVArh)
1
From the Set-up menu, use
and
buttons to select the Pulse Rate
option.
2
Press to enter the selection routine.
The current setting will flash. Use
and buttons to choose the Pulse
Constant. Press to confirm the
setting and press to return to the
main set up menu.
3.3.12 Pulse Duration
The energy monitored can be active or reactive and the pulse width can be selected as 200, 100(default)
or 60ms.