socomec ATyS d M - CONNECTION OF THE POWER CIRCUITS; 11.1. Ratings; cross-sections table of correspondence; 11.2. Parallel pole set-up for a 4 P device used in single phase

25
EN

11. 
Source supply side
Hexagonal Metric
Allen size 4
5,0 Nm
10 to
70 mm²
15mm
It is essential to tighten all used terminals, with cables and/or bridging bars before use.
11.1. 
     

recommended (mm

)
     

recommended (mm

)
     




Not compatible with aluminium cables
11.2. 


 
 
 
 
 
 
 