SOCOMEC - Réf. : 875 452B 5
ENGLISH
INSTALLATION
The Countis ATd is fitted on a DIN rail,
mounting plate or on the front of a
control panel with a special mounting
kit. (Please contact us for more infor-
mation)
• avoid proximity to systems which ge-
nerate electromagnetic interference
• avoid vibrations with accelerations
in excess of 1 G for frequencies
below 60 Hz.
To guarantee optimal operation, it is
recommended to use this equipment
at -5 up to 45°C with maximum rela-
tive humidity of 85%.
To avoid damage to the device please
ensure the following points are res-
pected before connecting:
• the indications on the case,
• power supply for model 230:
230V AC phase/phase +/-15%, or
power supply for model 400:
400V AC phase/phase +/-20%,
• 60 Hz network,
• 80 A maximum current,
• minimum cable section.
MECHANICAL ENVIRONMENT
CLIMATIC ENVIRONMENT
SAFETY INSTRUCTIONS
To Next Page
Loading...
