socomec COUNTIS E41 - MID Compliance; Type of Network; Fitting Terminal Covers; Locking the Program Button

12
EN
COUNTIS E41/E42 - 547979A - SOCOMEC
7. MID COMPLIANCE
The following points must be taken into consideration to ensure that the device is used in compliance with directive MID
2014/32/EU:
• Type of network
The COUNTIS E42 meter complies with the MID directive for connection to networks: 3P+N and 3P (see "6.2.
Connection to the electrical network and to the loads", page 11)
• Fitting terminal covers
After connecting the device, ensure that the terminal covers are tted properly and secured by the plastic seals
provided with the device.
• Locking the program button
Make sure the SET program button is locked after tting the terminal cover.
• MID Declaration of Conformity
The MID Declaration of Conformity is available on the website: www.socomec.com/en/countis-e4x
MID
seal