11
EN
COUNTIS E43/E44 - 547981A - SOCOMEC
7. MID COMPLIANCE
The following points must be taken into consideration to ensure that the device is used in compliance with directive MID
2014/32/EU:
• Type of network
The COUNTIS E44 meter complies with the MID directive for connection to networks: 3P+N (see "6.2. Connection to
the electrical network and to the loads", page 10)
• Fitting terminal covers
After connecting the device, ensure that the terminal covers are tted properly and secured by the plastic seals
provided with the device.
• Locking the program button
Make sure the SET program button is locked after tting the terminal cover.
• RS485 communication
The information provided via the RS485 COM is transmitted for information only and has no legal value.
• MID Declaration of Conformity
The MID Declaration of Conformity is available on the website: www.socomec.com/en/countis-e4x
MID
seal
To Next Page
Loading...
