EasyManuals Logo

socomec COUNTIS E43 User Manual

socomec COUNTIS E43
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
EN
COUNTIS E43/E44 - 547981A - SOCOMEC
4.6.2. Energy balance; denition
Formula
kWh (+kWh T1) – (-kWh T1) + (+kWh T2) – (-kWh T2)
kvarh (+kvarh T1) – (-kvarh T1) + (+kvarh T2) – (-kvarh T2)
5. INSTALLATION
The paragraphs below describe how to install the device.
5.1. Recommendations and safety
Refer to the safety instructions (section "2. Hazards and warnings", page 4)
Keep away from electromagnetic interference generator systems,
Avoid vibrations with accelerations greater than 1 g for frequencies lower than 60 Hz.
5.2. DIN rail mounted
The COUNTIS E43/E44 can be mounted on a 35-mm DIN rail (EN 60715TM35). It must be used inside electrical cabinets.

Other manuals for socomec COUNTIS E43

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the socomec COUNTIS E43 and is the answer not in the manual?

socomec COUNTIS E43 Specifications

General IconGeneral
Brandsocomec
ModelCOUNTIS E43
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals