socomec STATYS User Manual

STATYS
Jbus / Modbus serial link
2 OPMSTAJB0810-GB_01
ITALIANOENGLISH
Index
1. Foreword 3
2. S
aFety requIrement 3
2. 1. uSIng condItIonS 3
2. 2. StatyS operatIng reFerence 3
3. envIronment 3
3. 1. recyclIng oF electrIcal productS and equIpment 3
4. IntroductIon 4
4. 1. general purpoSe 4
4. 2. JbuS/modbuS protocol 4
4. 3. data decodIng 4
5. JbuS/modbuS SerIal InterFace InStallatIon InSIde StatyS 5
5. 1. ‘com-SlotS’ localISatIon 5
5. 2. JbuS/modbuS SerIal InterFace plug In 5
5. 3. connectIonS and wIrIng 6
6. JbuS/modbuS lInk 7
6. 1. SerIal lInk 1 and 2 deFault SettIngS 7
6. 2. How to cHange tHe SerIal lInk SettIngS ? 7
7. JbuS/modbuS protocol 8
8. StatyS JbuS/modbuS tableS 8
8. 1. How to read data: 8
8. 2. IncomIng data Structure: 8
8. 3. StateS tableS: StartIng addreSS 0x0140, 4 wordS 9
8. 4. alarmS tableS: StartIng addreSS 0x0148, 2 wordS 11
8. 5. meaSurementS tableS: SStartIng addreSS 0x0220, 64 wordS 12
8. 6. permISSIonS tableS: StartIng addreSS 0x0150, 1 wordS 14
8. 7. commandS tableS: StartIng addreSS 0x0190, wrIte 1 wordS 14

socomec STATYS Specifications

General

Brand	socomec
Model	STATYS
Category	Industrial Electrical
Language	English