STATYS
Jbus / Modbus serial link
OPMSTAJB0810-GB_01 3
ENGLISH
1. Foreword
Thank you for the trust you have in our Static Transfer System.
This equipment complies with the IEC 62310-2 product standard concerning Static Transfer Systems (STS).
CAUTION : “This is a product for restricted sales distribution to informed partners. Installation restrictions
or additional measures may be needed to prevent disturbances”.
SOCOMEC UPS reserves the right to modify their specifications at any time as far as this contrib-
utes to technical progress.
2. SaFety requIrement
2. 1. uSIng condItIonS
Do read carefully these operation instructions before using the JBUS/MODBUS interface.
Whatever the repairs, they must be made only by authorised stas, which have been suitably trained. It
is recommended that the ambient temperature and humidity of the STATYS environment are maintained
below the values specied by the manufacturer.
2. 2. StatyS operatIng reFerence
Respect the safety requirements.
Do read carefully the operation instructions of STATYS.
For an optimal operation, it is recommended to maintain the ambient temperature and humidity of the
STATYS environment below the values specied by the manufacturer.
This equipment meets the requirements of the European directives applied to this product. As a conse-
quence it is labelled as follows:
3. envIronment
3. 1. recyclIng oF electrIcal productS and equIpment
Provision is made in European countries to break up and recycle materials making up the system. The vari-
ous components must be disposed of in accordance with the legal provisions in force in the country where
the system is installed.
To Next Page
Loading...
Need help?
General
