Soehnle Standard - 1.13 User programmable function key



34
www.soehnle-professional.com
1.13 User programmable function key
To activate the function key:
Press and hold the Print button and then press the On/Off button for 5 seconds
until UCAL1 appears.
With the Tare button, raise this value to UCAL4 and then press the Print button to
store.
Use the Tare button to move to position 02 and press the Print button to store.
Function assignments:
Value Function
1 Hold mode
2 Switch to 2nd unit of weight
3 Not used
4 Manual tare input
5 Temporary tare
6 Counting
7 Percentage weighing
8 Neutral measurement
9 PLU
Select the desired function value using the Tare or Function key.
Then press the Print button to store. Position 03 appears on the display.
Press the Zero button, UCAL4 appears on the display.
To save the setting and exit, press and hold the Print button then briefly press the
Zero button. The display returns to weighing mode.