How to prevent OverTempFault_BAT on Sofar solar HYD 3000-ES?
To prevent OverTempFault_BAT on your Sofar solar Inverter, please make sure the inverter is installed in a place without direct sunlight.
How to troubleshoot BatUTC error on Sofar solar HYD 3000-ES?
To troubleshoot the BatUTC error on your Sofar solar Inverter, try to increase the ambient temperature of the battery.
How to fix UnrecoverIpv Unbalance error on Sofar solar HYD 3000-ES?
To fix the UnrecoverIpv Unbalance error on your Sofar solar Inverter, check the PV input mode (parallel mode/ independent mode) setting of the inverter. If it’s incorrect, change the PV input mode.
What to do if Sofar solar HYD 3000-ES shows GridOVP?
If the GridOVP alarm appears occasionally on your Sofar solar Inverter, it might be due to temporary electric grid issues. The inverter should automatically return to normal when the grid stabilizes. If the alarm occurs frequently, verify that the grid voltage and frequency are within the correct range. If they are, inspect the AC circuit breaker and wiring of the inverter. If the grid voltage/frequency is outside the acceptable range, and the wiring is correct, the grid over-voltage, under-voltage, over-frequency, under-frequency protection points can be changed after obtaining approval from the local electrical grid operator.
Why does my Sofar solar HYD 3000-ES Inverter show PVOVP?
The PVOVP error on your Sofar solar Inverter indicates that the PV string voltage (Voc) is higher than the maximum input voltage of the inverter. This can happen if too many PV modules are connected in series in a PV string. To fix this, reduce the number of PV modules connected in series to ensure the PV string voltage is within the inverter's acceptable input voltage range.
What to do if Sofar solar HYD 3000-ES displays GFCI OCP fault?
If the GFCI OCP fault occurs occasionally on your Sofar solar Inverter, it might be due to temporary external circuit abnormalities. The inverter should automatically return to normal operation once the issue is resolved. However, if the fault occurs frequently and persists, check the insulation resistance between the PV array and earth (ground). Also, inspect the insulation conditions of the PV cables.
General| Model | HYD 3000-ES |
|---|---|
| Type | Hybrid Inverter |
| Rated Output Power | 3000 W |
| Max. DC Input Power | 4500 W |
| Max. DC Voltage | 600 V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 11 A |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280V |
| Max. AC Output Power | 3000 W |
| Max. Output Current | 13 A |
| Max Efficiency | 97.5% |
| Efficiency | 97% |
| Battery Voltage | 48 V |
| Max. Charging/Discharging Current | 50A |
| Dimensions | 420 x 370 x 130 mm |
| Weight | 12 kg |
| Cooling Method | Natural Cooling |
| Protection Class | IP65 |
| Communication | RS485/WiFi/GPRS/Ethernet |
| Max. PV Input Power | 4500 W |
| Max. PV Input Voltage | 600 V |
| Number of MPP Trackers | 2 |
| Output Voltage | 230 V |
| Output Frequency | 50/60 Hz |
| Peak Efficiency | 97.5% |
| European Efficiency | 97% |
| MPPT Efficiency | 99.9% |
| Operating Temperature Range | -25°C to 60°C |
To Next Page