ME 3000SP User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
3.6. Mount ME 3000SP
Fig.3-3 Mount ME 3000SP
Step 1: Put the mounting bracket properly on the wall, mark these 8 drill holes
using a marker pen. Drill 8 holes (drill bit 6mm) on the wall.
Step 2: Insert the expansion screw vertically into the hole, note the insertion depth.
(not too shallow or too deep)
Step 3: Fix the mounting bracket on the wall using bolts & flat washers.
Step 4: Put ME 3000SP inverter on the mounting bracket.
Step 5: Earth ME 3000SP inverter using the grounding hole on the heat sink.
Step 6: OPTIONAL: you can lock ME 3000SP inverter to the mounting bracket.
To Next Page
Loading...
