SOFAR 60-80KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
technical support to change the grid over-voltage,
under-voltage, over-frequency, under-frequency
protection points after obtaining approval from
the local electrical grid operator.
If the fault occurs occasionally, the possible cause
is that the external circuits are abnormal
occasionally. inverter automatically returns to
normal operating status after the fault is rectified.
If the fault occurs frequently and lasts a long time,
check whether the insulation resistance between
the PV array and earth(ground) is too low, then
check the insulation conditions of PV cable.
Internal faults of inverter, switch OFF inverter,
wait for 5 minutes, then switch ON inverter.
Check whether the problem is solved.
If not, please contact SOFARSOLAR technical
support.
Transient
overvoltage of grid
voltage 1
Transient
overvoltage of grid
voltage 2
Power grid line
voltage error
Internal faults of inverter, switch OFF inverter,
wait for 5 minutes, then switch ON inverter.
Check whether the problem is solved.
If not, please contact SOFARSOLAR technical
support.
Power grid current
sampling error
Wrong sampling of
dc component of
grid current
Power grid voltage
sampling error (DC)
Power grid voltage
sampling error (AC)
Leakage current
sampling error(DC)
Leakage current
sampling error(AC)
Dc input current
sampling error