20
© Softing Industrial Automation GmbH
dataFEED Gateway - User Manual
4.3.4 MQTT Client Certificate
The MQTT Client Certificate view allows to select the client certificate which is used to authenticate the MQTT
Client at the MQTT Broker.
For defining the certificate the following input opportunities are supported:
1. The PEM format file containing the public certificate chain of the client. It may also include the private key
of the client, which may be encrypted optionally.
The client certificate file can be selected using the Browse... button.
2. If not included in the certificate file above (see issue 1.), the PEM format file containing the private key of
the client has to be defined.
The client certificate file including the private key can be selected using the Browse... button.
3. Definition of the password to load the private key of the client, if it is included in the files described above
in an encrypted way.
4. Activation of MQTT Client certificate usage
Saving and applying settings
1. Click the Save button to save your settings.
A hint will appear reminding you that the application of some other settings is pending:
2. Click at this link. Your settings will be applied.
Depending on the number of modified settings this process may take some time before being completed.
3. A message in the upper window part will inform you about the successful modification(s).
To Next Page
Loading...